Setting up the turbo for the install. 

This turbo came 180 degrees off of where I needed it to be for this install. With the exhaust inlet up, the oil outlet was also up.  I needed the oil outlet to face down of course.  To correct this I removed the compressor housing and loosened the 4 bolts holding the shaft housing to the exhaust side of the turbo.  I then simply rotated the housing to where I needed it to be and re-tightened the bolts.  After that I re-attached the compresser housing in the correct position.  Be extremely careful when removing and re-attaching the compressor housing.  The compressor blades can be easily broken or damaged. 

{gallery}SSATurbo/turboturn{/gallery}