Turbo Trial (ended)

The kit only came with a T3/T4 Oil return flange.  It did however come with the correct gasket.  Instead of requesting the correct flange I just decided to modify the T3/T4 so it would fit.  This was very simple to fo and only took about 10 minutes with a small milling bit.  There isnt much space between the oil outlet fitting and the compressor housing which might pose a problem during the install.  Rotating the compressor housing slightly may cure this problem.

• CLICK_TO_ENLARGE CLICK_TO_ENLARGE
• CLICK_TO_ENLARGE CLICK_TO_ENLARGE
• CLICK_TO_ENLARGE CLICK_TO_ENLARGE
• CLICK_TO_ENLARGE CLICK_TO_ENLARGE
• CLICK_TO_ENLARGE CLICK_TO_ENLARGE