Login Form

Google Ad

Support / Knowledge

Oil Catch Can Design

Pin It

With winter fast approaching its time to start working on some small projects inside the shop. One thing I think is a necessity yet have never been satisfied with is the oil catch can and PCV setup on my car. I have come up with a catch can of my own design that I plan to start work on soon. I hope that it will remove almost all traces of oil mist from the crank ventilation.

This is specially needed on my engine as the stock PCV catch can (mounted on the back of the block) has been removed. This was because I didn't want the sludge it collects to run back into the engine as it is designed to do. I would much rather collect it separate and drain it out at every oil change.

This is my basic design theory.

UPDATE: This has been fabricated. CLICK HERE to be taken to the fabrication article.